[TPIN] BENGE QUESTION

[trptjoe at aol.com]

A CG (Claude Gordon) Benge is technically a large bore .468 bore (they're stamped with an L), but the section of the bell that comes out of the 1st valve is a .464 bore. Kind of like squeezing the hose so that the water comes out with more force. You'll sometimes see them referred to as .468/.464 trumpets. They are neither 6X nor 7X nor any-other-X. No model number is stamped on the bell.



Joe


-----Original Message-----
From: KenTaylorTrpt at aol.com
To: TPIN at tpin.okcu.edu
Sent: Wed, 19 Mar 2008 9:34 am
Subject: [TPIN] BENGE QUESTION








So, if the Benge 6X is .468 and the 7X is .470, what size is the CG  model?
I have a nice CG Benge that I am going to add to the list of horns for  sale
on my web site, if anyone is interested.
 
Ken Taylor
Scottsdale, Arizona
_www.Trumpet-Kentaylor.com_ (http://www.Trumpet-Kentaylor.com) 



**************Create a Home Theater Like the Pros. Watch the video on AOL 
Home.      
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15?ncid=aolhom00030000000001)
_______________________________________________
TPIN mailing list
TPIN at tpin.okcu.edu
http://tpin.okcu.edu/mailman/listinfo/tpin